INSTALLATION MANUAL
Optibox 16
Page 7 of 10
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the
general handling of these products please contact HUBER+SUHNER.
Step 8
Cassette versions:
The OTB16 can be populated with differ-
ent cassettes. You can use SCM [A], MCM
[B] and SPC [C](Splitter) Cassettes. De-
pends of the way the OTB16 should be
populated, you can place the different
types cassettes in a customized order.
The 8 slot can be populated with 8 SCM or
8 MCM cassettes, or up to 4 SPC cas-
settes (or a mix of it).
Step 9
Assembly of the cassettes:
The cassettes can be snapped into the
inlay in a 90° angle. The cassettes have to
be positioned on the inlay in the right posi-
tion, than they have to pressed into the
inlay until they are snapped in. After that
the cassettes can be moved to the front
and to the back side, where they fit inde-
pendently.
