INSTALLATION MANUAL
Optibox 16
Page 8 of 10
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the
general handling of these products please contact HUBER+SUHNER.
Step 10
Fibermanagement ACS-MCM:
1. Splicing area
2. Overlength area and chaos field
The ACS System can cover the following
quantities:
48 pieces 250µm
24 pieces 600µm
12 pieces 900µm
Detailed information about the ACS Sys-
tem can be found in a separate document.
Step 11
ACS Cassette lock:
The ACS cassette support can be used to
secure single or several cassettes in an
opened position. To use the ACS cassette
support it has to be broken away, after that
it can be used for every cassette position.
The ACS cassette support can be used as
shown. It must be placed into the inlay and
then pushed to the left or right side. For
removing you need to make the same
steps in the opposite direction.
