INSTALLATION MANUAL
Optibox 16
Page 2 of 10
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the
general handling of these products please contact HUBER+SUHNER.
Installation
red: 3x Cable entry
yellow: 6x Cable Exit
green: Area for cableguiding and slots for
fixing the cassettes
purple: Area for cableguiding, patching
and overlength storage
Step 1
Preparing cable entries
(U-Shape grommets and cable glands)
At the bottom side of the box you can
open 8 holes for cable entries or exit with
U-Shape grommets or cable glands. If you
are using cable glands you have to drill the
correct hole. You can use M16 and M25
cable glands. If you are using M25 glands
please take care that the outer dimension
is max. 33.5mm.
If you are using U-Shapes, you have to
make a cut according to the red line on the
picture. After that you can break out easily.