AP-120-MNT-CV Access Point Enclosure
Installation Guide
0510596-02
| July 2010
1
Introduction
The AP-120-MNT-CV access point (AP) enclosure is designed to provide some protection and limited
access to an AP-121 or AP-125. The AP-120-MNT-CV can be installed directly over a standard junction
box or on the ceiling, using ceiling tile rails.
To install the AP-120-MNT-CV on a wall, proceed to
"Installing the AP-120-MNT-CV on a Wall" on page 2
.
To install the AP-120-MNT-CV on a ceiling, proceed to
"Installing the AP-120-MNT-CV on a Ceiling" on
page 5
.
The AP-120-MNT-CV kit includes the following:
z
1x Plastic base, which attaches to the AP
z
1x Plastic cover, which hides the AP’s ports
z
1x Plastic outlet-mounting plate
z
1x 9/16" ceiling tile adapter
z
1x 15/16" ceiling tile adapter
Additional Tools
z
A screwdriver that matches the screws in the cover plate over the installed junction box
z
(Optional) flat-head screwdriver or similar tool to punch out antenna access cutouts
AP120_006
Cover
Base
Mounting
Plate
Parts not to scale
9/16" Rail Adapter
15/16" Rail Adapter
