manualshive.com logo in svg

Huawei TaiShan 2280 V2, Руководство пользователя

Поделиться
Скачать
Huawei TaiShan 2280 V2 Скачать руководство пользователя страница 63

Figure 4-1

 Direction of heat dissipation

4.1.2 Temperature and Humidity Requirements

To ensure continued safe and reliable equipment operation, install or position the system in a
well-ventilated, climate-controlled environment.

l

Use temperature control devices all year long in any climates.

l

In dry and humid areas, maintain ambient humidity within range with humidifiers and
dehumidifiers respectively.

Table 4-1

 Temperature and humidity requirements in the equipment room

Item

Description

Temperature

5ºC to 35ºC (41ºF to 95ºF)

Humidity

8% RH to 90% RH (non-condensing)

 

4.1.3 Cabinet Requirements

l

A standard 19-inch cabinet with a depth of more than 1000 mm (39.37 in.).

l

Complies with International Electrotechnical Commission 297 (IEC 297).

l

Air filters installed on cabinet doors.

l

AC power supplied from the rear of the cabinet.

4.2 Unpacking the Chassis

Step 1

Check that the packaging is in good condition.

TaiShan 2280 V2 Server
User Guide

4 Setup

Issue 01 (2019-07-01)

Copyright © Huawei Technologies Co., Ltd.

55

Содержание TaiShan 2280 V2


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды