Huawei ES3000 V3, Руководство пользователя

Страница: 34 / 209

Preparations
l Stop all services on the server and back up data.
l Unpack and inspect the devices.
Check that the items shipped are complete and intact based on the following list:
– ES3000 V3
–
Quick Start Guide
– Warranty card
l Tools
–
ESD gloves
Used to prevent ESD damage when you insert, remove, or hold the ES3000 V3 or a
precision device.
Pay attention to the following in Linux:
l Do not perform direct read or write operations on a raw SSD to avoid processing the
wrong SSD due to a changed drive letter. Restarting the server, installing or uninstalling
the SSD driver, inserting and removing the SSD may change the SSD drive letter.
l If you have to perform direct read or write operations on a raw SSD, use the hioadm info
command to check the SSD information and confirm the drive letter through the SSD SN.
l It is recommended that you use the mount command to mount the SSD partitions to a
specified path before performing read and write operations. To ensure normal release of
system resources, use the unmount command to cancel the mounted SSD partitions before
installing or uninstalling the driver, and inserting or removing the SSD.
l You can also add information to the /etc/fstab file so that SSD partitions are automatically
mounted during system startup, driver installation and uninstallation, and SSD insertion
and removal. For details, run the
man fstab command to view help information. After
enabling the automatic mounting of SSD partitions, you do not need to run the umount
command before installing or uninstalling the driver, and inserting or removing the SSD.
Procedure
l Install the ES3000 V3 NVMe PCIe SSD.
a. Wear ESD gloves.
b. Take the ES3000 V3 out of the ESD bag. Check whether a 2.5-inch or 3.5-inch hard
disk tray is used.
n
For a 2.5-inch hard disk tray, go to c .
n
For a 3.5-inch hard disk tray, go to e .
c. Place the ES3000 V3 into the hard disk tray. See step (1) in Figure 3-2 .
d. Use four screws to secure the ES3000 V3 to the hard disk tray. See step (2) in
Figure 3-2 . Then go to h .
ES3000 V3 NVMe PCIe SSD
User Guide
3 Installation and Configuration
Issue 20 (2019-02-27) Copyright © Huawei Technologies Co., Ltd. 24