eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
Figure 1-8
File copy procedure in One USB for Multiple Sites mode
10.
Optional:
If you need to preset the operator's root certificate in the SD card, you can
manually copy the root certificate file provided by the carrier to the SD card: \ MBTS
directory.
Checking a Transport Network
This section describes how to check a transport network. The transport network affects the
Automatic OMCH Establishment feature. Therefore, before commissioning an
eAN3810A,O&M engineers must check whether the OMCH networking and the network
equipment meet the configuration requirements of the corresponding scenario.
Check Methods
O&M engineers can check whether the transport network meets the configuration
requirements of the Automatic OMCH Establishment feature by using either of the following
methods:
Method 1: Confirm with the department in charge of the transport network whether the
transport network meets the requirements.
Method 2:
Check the network connectivity. If nodes in the transport network can be pinged, ping
the port corresponding to each node to check whether the transmission channel at each
node is ready.
Check whether the network equipment at each node is configured as required to ensure
that an eAN3810A can automatically establish the OMCH.
Checking the SD Card Port Status
This section describes how to check the SD card port status with MML commands.
Prerequisites
The transmission network is ready.
The eAN3710A is connected to the U2000 or Web LMT.
