eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
52
Step 10
Activate cells.
1.
Run the
ACT CELL
command to activate a cell.
Step 11
Connect to the U2000.
1.
Run the
MOD IPOAM
command to modify the configuration of an IP maintenance
channel.
Set the
Peer IPv4 Address
parameter to
10.145.35.15
.
----End
Script
//Adding NE applications. If there is an LTE application, do not run the following command.
ADD APP:applicationNo=2,applicationType=LTE;
//Adding IP addresses and routes (used for connection to the S1 interface and the U2000)
ADD
IPINTERFACE:IPINTERFACENO=1,INTERFACEREFTYPE=ETHERNET,INTERFACEREF=0,IPADDRESS="19
3.168.100.59",IPMASK="255.255.255.0";
ADD
IPINTERFACE:IPINTERFACENO=2,INTERFACEREFTYPE=ETHERNET,INTERFACEREF=0,IPADDRESS="17
2.253.254.59",IPMASK="255.255.255.0";
ADD
ROUTE:ROUTENO=0,DESTIPADDR="200.100.109.0",DESTIPMASK="255.255.255.0",NEXTHOPIP="1
93.168.100.100";
ADD
ROUTE:ROUTENO=1,DESTIPADDR="10.145.35.0",DESTIPMASK="255.255.255.0",NEXTHOPIP="172
.253.254.254";
//Adding local and peer information of the data-plane and control-plane of the S1
interface
ADD LOGICALPORT: LOGICALPORTNO=0,INTERFACENO=0;
ADD TRANSPORTDEVICE:TRANSPORTDEVICENO=0;
ADD SCTPHOST:SCTPHOSTNO=0,IPINTERFACEREF=1,LOCALPORT=1024;
ADD USERPLANEHOST:USERPLANEHOSTNO=0,IPINTERFACEREF=1;
ADD SCTPPEER:SCTPPEERNO=0,PEERIPV4ADDR="200.100.109.100",PEERPORT=36412;
ADD USERPLANEPEER:USERPLANEPEERNO=0,PEERIPV4ADDR="200.100.109.109",REMOTEID="1";
//Adding mapping relations required by the S1 interface
ADD LOGICALPORT2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0;
ADD SCTPHOST2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0;
ADD SCTPPEER2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0;
ADD UPHOST2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0;
ADD UPPEER2TRPDEV:TRANSPORTDEVICENO=0,REFNO=0;
//Adding operators and TAs
ADD
CNOPERATOR:CNOPERATORID=0,CNOPERATORNAME="CMCC",CNOPERATORTYPE=CNOPERATOR_PRIMARY,
MCC="460",MNC="90";
ADD CNOPERATORTA:TRACKINGAREAID=0,CNOPERATORID=0,TAC=1;
//Adding an S1 object
ADD
S1:S1ID=0,CNOPERATORID=0,TRANSPORTDEVICECFGFLAG=CP_UP_CFG,CPTRANSPORTDEVICENO=0,UP
