eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
read files on the MicroSD card or fails to be deployed. The MicroSD card may be
faulty and cannot be detected, if the RUN indicator status does not change.
d.
In configuration-free deployment scenarios, wait until the eAN3810A automatically
downloads the preconfiguration file and reads the preconfigured information. In site
deployment scenarios, wait until the eAN3810A completes the following procedure:
automatically loads and activates the software and data configuration files, and
restarts itself to make them take effect.
Table 1-4
Mapping between the RUN indicator status and loading status
Loading Status
RUN Indicator Status
The loading succeeds
Slowly blinking (on for 1s and off for 1s)
for more than 1 minute
Loading...
Blinking orange and white alternately (on
for 0.125s and off for 0.125s)
The loading fails.
Blinking orange (on for 0.125s and off for
0.125s)
In MicroSD card deployment scenarios, the eAN3810A automatically activates the downloaded
software and configuration file and then restarts for them to take effect. The activation and restart
take about 30 minutes, during which the indicator status is negligible.
During loading, do not remove the MicroSD card.
e.
Remove the MicroSD card only after you have confirmed that the loading succeeds.
Follow-up Procedure
If the software version is incorrect after the loading process is completed, perform the
following operations:
1.
Insert a MicroSD card storing the correct software version to the eAN3810A.
2.
Remove the MicroSD card after the eAN3810A loads the software package and
successfully completes the upgrade.
1.2.4 Engineering Verification
This section describes how to complete the eAN3810A commissioning task, view deployment
results, and verify services.
Viewing Deployment Results at Sites
This section describes how to view deployment results at sites based on indicator status.
Check the status of indicators on a newly deployed eAN3810A.
The following table shows the indicator status if an eAN3810A is deployed successfully and
working properly. See
