eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
44
b.
Determine whether to restart the eAN3810A after a MicroSD card is inserted based
on the power-on status of the eAN3810A.
If...
Then...
The eAN3810A has been powered on.
Insert the MicroSD card into the related port
on the eAN3810A. Remove and reinsert the
Ethernet cable for power supply, and then
go to 3.
The eAN3810A has not been powered on.
Insert the MicroSD card into the related port
on the eAN3810A. Connect the eAN3810A
to a PSE over an Ethernet cable. Power on
the eAN3810A, and then go to
c.
Perform the power-on check. For details about how to perform the power-on check,
see section "
Power-On Check on the eAN3810A
" in
eAN3810A Hardware
Installation Guide
.
Check the RUN indicator for hardware faults on the MicroSD card. The RUN
indicator blinks orange (on for 0.125s and off for 0.125s), if the eAN3810A fails to
read files on the MicroSD card or fails to be deployed. The MicroSD card may be
faulty and cannot be detected, if the RUN indicator status does not change.
d.
In configuration-free deployment scenarios, wait until the eAN3810A automatically
downloads the preconfiguration file and reads the preconfigured information. In site
deployment scenarios, wait until the eAN3810A completes the following procedure:
automatically loads and activates the software and data configuration files, and
restarts itself to make them take effect.
Table 1-9
Mapping between the RUN indicator status and loading status
Loading Status
RUN Indicator Status
The loading succeeds
Slowly blinking (on for 1s and off for 1s)
for more than 1 minute
Loading...
Blinking orange and white alternately (on
for 0.125s and off for 0.125s)
The loading fails.
Blinking orange (on for 0.125s and off for
0.125s)
In MicroSD card deployment scenarios, the eAN3810A automatically activates the downloaded
software and configuration file and then restarts for them to take effect. The activation and restart
take about 30 minutes, during which the indicator status is negligible.
During loading, do not remove the MicroSD card.
e.
Remove the MicroSD card only after you have confirmed that the loading succeeds.
Follow-up Procedure
If the software version is incorrect after the loading process is completed, perform the
following operations:
