HT 400 Series, Руководство пользователя

Страница: 53 / 88

400 Series
EN - 51
Fig. 27: Instrument connection for measuring the phase sequence with two leads, phase 2 connection
9. When the instrument detects
a voltage higher than the
minimum limit value on the
test lead, the instrument
displays the screen reported
here to the side and starts
measuring the second
voltage. The instrument
gives a long acoustic signal
until input voltage is present
1 2 3
1--
Measuring…
Measuring phase 2
1T
Func
10. Once acquisition is
completed, if the instrument
has detected a correct phase
sequence, it displays 123
and the message OK. It also
gives a double acoustic
signal 1 2 3
123
Correct phase sequence
OK
1T
Func
11. Once acquisition is
completed, if the instrument
has detected two voltages in
phase, it displays a screen
similar to the one reported
here to the side and gives a
double acoustic signal 1 2 3
11-
Phase conformity
OK
1T
Func
12.
The results displayed can be saved by pressing the
SAVE
key twice or the
SAVE
key and, subsequently, the
ENTER
key (§ 8.1)