HPE ProLiant ML30 Gen10, Руководство пользователя

Страница: 35 / 142

• Server
• Power cord
• Rack-mounting hardware (optional)
• Documentation
The server does not ship with OS media. All system software and firmware is preloaded on the server.
Install the hardware options
2. (Optional) Install the hardware options. For installation instructions, see Hardware options installation.
Orient the server and connect the peripherals
3. Select the server orientation:
• If the server is in tower mode: Position the tower server for hardware configuration.
• If the server is in rack mode:
Remove the server from the rack.
4. Decide how to manage the server:
• Locally: Use a KVM switch or connect a keyboard, monitor, and mouse.
• Remotely: Connect to the iLO web interface and run a remote console:
a. Verify the following:
◦ iLO is licensed to use the remote console feature.
If iLO is not licensed, visit:
http://www.hpe.com/info/ilo
◦ The iLO port is connected to a secure network.
b. Using a browser, navigate to the iLO web interface, and then log in. The web interface can be accessed by
entering the iLO hostname or IP address in the following format:
https://<iLO hostname or IP address>
NOTE:
◦ The iLO hostname is located on the serial number/iLO information label located on the top of the chassis.
◦
If a DHCP server assigns the IP address, the IP address appears on the boot screen.
◦ If assigned, use the static IP address.
◦ The default login credentials are located on the serial number/iLO information pull tab.
c. In the navigation pane, click Remote Console & Media, and then launch a remote console.
Power on the server
5. Press the Power On/Standby button.
For remote management, use the iLO virtual power button.
6. Using the SPP, update the following:
Setup
35