HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 26 / 58

Hardware options installation
Hewlett Packard Enterprise product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/qs ).
Installing a DIMM
The cartridge supports HPE Smart Memory. The HPE SmartMemory authenticates and unlocks certain
features available only on Qualified memory and verifies whether installed memory has passed Hewlett
Packard Enterprise qualification and test processes. Qualified memory is performance-tuned for ProLiant
and BladeSystem servers and provides future enhanced support through Active Health and manageability
software.
The cartridge has four DIMM slots. For DIMM slot population order and DIMM slot locations, see DIMM
slot numbering on page 7.
Procedure
1. Power down the cartridge on page 10.
2. Extend the chassis from the rack on page 11.
3. Remove the access panel on page 12.
4. Remove the cartridge on page 14.
5. Install the DIMM.
Installing an M.2 solid state device
You can install solid state drives of the following lengths in this cartridge:
• 42 mm M.2 SSD ( Install a 42 mm M.2 solid state device on page 27): Supported only in slot 3
• 80 mm M.2 SSD ( Install an 80 mm M.2 solid state device on page 27): Supported in all slots
except slot 3
• 110 mm M.2 SSD ( Install a 110 mm M.2 solid state device on page 28): Supported in slots 4 and 5
Install the SSDs in the following population order: 4->1->2->5
For SSD slot locations, see M.2 SSD slot numbering on page 8.
26 Hardware options installation