HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 12 / 58

Remove the access panel
IMPORTANT:
After performing a procedure inside the chassis, always install the access panel on the chassis
when complete. Do not operate the chassis for long periods of time with the access panel removed.
IMPORTANT:
To maintain appropriate cooling, fans will operate at a high speed when the access panel is
removed.
IMPORTANT:
When the access panel is removed, the cartridge might be placed into a low power operating state
to reduce thermal stress.
Procedure
1. If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
2. Open the locking latch.
The access panel slides back, releasing it from the chassis.
3. Lift and remove the access panel.
12 Remove the access panel