HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 24 / 58

For information on installing the GPU driver, see the 'Installing graphics packages (m710x)' topic in
the OS deployment guide on the Hewlett Packard Enterprise Information Library (
http://
www.hpe.com/info/moonshot/docs ).
3. Reboot the cartridge. ( Power up the cartridge on page 16).
4. When the BIOS screen is displayed, press the F9 key.
5. Go to System Options -> BIOS/Platform Configuration (RBSU) -> Advanced Options -> Video
Options .
6. Select Integrated/Add-in Video Enabled, iLO Video Disabled .
7. Press the F10 key to Save the changes.
A prompt asking whether to save the changes is displayed.
8. Select Yes .
9. Power down the node.
10. Connect the monitor to the cartridge.
11. Power up the cartridge on page 16.
The video is displayed on the monitor inside the OS.
To revert to displaying video on iLO, change the RBSU setting in BIOS to Both Integrated/Add-in Video
and iLO Video Enabled . You can do this using the monitor, or the Virtual Serial Port.
Enabling video on monitor for Linux (except RHEL 7.3 and CentOS 7.3)
Only RHEL 7.3 and CentOS 7.3 support using monitor during OS installation. Install all other Linux
operating systems using iLO Integrated Remote Console.
Procedure
• To enable video on the monitor after the OS is installed, install Media Server Studio from Intel.
24 Enabling video on monitor for Linux (except RHEL 7.3 and CentOS 7.3)