HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 18 / 58

Setup
IMPORTANT:
The HPE Synergy Gen10 compute module installation involves a minimum upgrade requirement for
component compatibility purposes. To ensure proper system functionality, you must update your
system to Release Set Version 3.00.20170707 (or later) before installing and operating your
compute module. Go to
http://www.hpe.com/downloads/synergy and see the HPE Synergy
Firmware Update Overview guide at http://www.hpe.com/info/synergy-firmware-update-
overview-en for specific details on updating compute module components.
Overview
Installation of a cartridge requires the following steps:
Procedure
1. Install and configure the HPE Moonshot 1500 Chassis ( Installing and configuring the HPE
Moonshot 1500 Chassis on page 18).
2. Install and configure the switch and uplink modules ( Installing and configuring the switch and
uplink modules on page 18).
3. Install the solid state device ( Installing an M.2 solid state device on page 26).
4. Install the cartridge on page 14.
5. Power up the chassis ( Powering up the chassis on page 19).
6. Power up the node ( Powering up the node on page 19).
7. Update the cartridge firmware ( Updating cartridge firmware on page 19).
8. Install the operating system ( Installing the operating system on page 20).
9. Register the product ( Registering the product on page 20).
Installing and configuring the HPE Moonshot 1500
Chassis
Before performing any cartridge-specific procedures, install the HPE ProLiant Moonshot 1500 Chassis.
For more information on installing a chassis, see the
HPE Moonshot 1500 Chassis Setup and Installation
Guide in the Hewlett Packard Enterprise Information Library ( http://www.hpe.com/info/moonshot/
docs ).
Installing and configuring the switch and uplink modules
For specific steps to install the switch modules and uplink modules, see the switch documentation in the
Hewlett Packard Enterprise Information Library (
http://www.hpe.com/info/moonshot/docs ).
Installing the cartridge
Procedure
1. Do one of the following:
• Remove the cartridge blank on page 13.
• Remove the cartridge on page 14.
2. Install the cartridge on page 14.
18 Setup