HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 20 / 58

Installing the operating system
The HPE Moonshot 1500 Chassis supports up to 45 cartridges, each with a processor, drive, and
memory, and can run an operating system. It is possible to load each cartridge individually with an OS via
PXE. For OS deployment procedures, see the operating system deployment documentation in the
Hewlett Packard Enterprise Information Library (
http://www.hpe.com/info/moonshot/docs ).
To provision a full complement of cartridges quickly, Hewlett Packard Enterprise recommends the HPE
Insight Cluster Management Utility for large-scale image deployment. The Insight CMU is an efficient and
robust hyperscale cluster lifecycle management framework and suite of tools for large Linux clusters.
For more information on Insight CMU features and links to technical documents, QuickSpecs, and a
product demonstration, see the Hewlett Packard Enterprise website (
http://www.hpe.com/info/cmu ).
Registering the product
To experience quicker service and more efficient support, register the product at the Hewlett Packard
Enterprise Product Registration website .
HPE Trusted Platform Module
Trusted Platform Module (TPM) Notice
HP Special Reminder: Before enabling Trusted Platform Module (TPM) functionality on this system, you
must ensure that your intended use of TPM complies with relevant local laws, regulations and policies,
and approvals or licenses must be obtained if applicable.
For any compliance issues arising from your operation/usage of TPM which violates the above mentioned
requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related
liabilities.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/qs ).
The TPM is embedded in the system board of the server. Use these instructions to enable a TPM on a
supported cartridge. This procedure includes two sections:
1. Retaining the recovery key/password on page 20.
2. Enabling the Trusted Platform Module on page 21.
Enabling the TPM requires accessing BIOS/Platform Configuration (RBSU) in UEFI System Utilities.
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery key/
password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
To help ensure maximum security, observe the guidelines listed in the following procedure list when
retaining the recovery key/password.
20 Installing the operating system