HPE ProLiant m710x, Руководство пользователя и по обслуживанию

Страница: 14 / 58

Remove the cartridge
CAUTION:
For proper cooling, be sure that a cartridge or a cartridge blank is always installed in each cartridge
slot in the chassis. When replacing a cartridge, leave the cartridge slot empty for no more than 30
seconds. Failure to do so can disrupt airflow in the chassis.
Procedure
1. Power down the node or cartridge ( Power down the cartridge on page 10).
2. Extend the chassis from the rack on page 11.
3. Remove the access panel on page 12.
4. Remove the cartridge.
Install the cartridge
CAUTION:
For proper cooling, be sure that a cartridge or a cartridge blank is always installed in each cartridge
slot in the chassis. When replacing a cartridge, leave the cartridge slot empty for no more than 30
seconds. Failure to do so can disrupt airflow in the chassis.
Procedure
1. Extend the chassis from the rack on page 11.
2. Remove the access panel on page 12.
3. Prepare the cartridge.
14 Remove the cartridge