• Air blocker installation on the rear thermal bracket
To replace the component, reverse the removal procedure.
Removing and replacing the secondary riser slot 3
transfer board
CAUTION:
Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
Prerequisites
Before you perform this procedure, make sure that you have thea T-10 and T-15 Torx screwdrivers
available.
Procedure
on page 27.
2.
Disconnect all peripheral cables from the server.
3. Remove the server from the chassis
on page 27.
5. Remove the secondary riser cage
on page 30.
6.
If an expansion board is installed, do the following:
Removal and replacement procedures
49
Содержание ProLiant DX190r Gen10
Страница 21: ...Customer self repair 21...
Страница 22: ...22 Customer self repair...
Страница 23: ...Customer self repair 23...
