HPE ProLiant DL580 Gen10, Руководство пользователя

Страница: 78 / 158

Installing a 4-port NVMe mezzanine card
Prerequisites
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• A T-10 Torx screwdriver might be needed to unlock the access panel.
• A primary riser PCIe riser cage with a 4-port NVMe riser card installed.
Procedure
1. Power down the server on page 32.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack ( Extending the server from the rack on page 32).
• Remove the server from the rack ( Removing the server from the rack on page 33).
4. Remove the access panel ( Removing the access panel on page 36).
CAUTION:
Do not operate the server for long periods with the access panel open or removed. Operating the
server in this manner results in improper airflow and improper cooling that can lead to thermal
damage.
5. Remove the primary PCIe riser cage ( Removing a PCIe riser cage on page 39).
NOTE:
If you are not installing a new primary PCIe riser cage that has a 4-port NVMe riser card installed, be
sure to remove the riser card from the existing primary PCIe riser cage, and replace it with a 4-port
NVMe riser card.
6. If installed, remove the butterfly riser cage ( Removing a PCIe riser cage on page 39).
7. Remove the air baffle ( Removing the air baffle on page 40).
8. If installed, remove the processor mezzanine tray ( Removing the processor mezzanine tray on page
45).
9. Remove the fan cage ( Removing the fan cage on page 42).
10. Remove the fan cage holders ( Removing the fan cage holders on page 44).
11. Install the bracket.
78 Installing a 4-port NVMe mezzanine card