HPE ProLiant DL580 Gen10 Скачать руководство пользователя

Страница: 115 / 158

Proceed to

Preparing the server for operation

on page 115.

Preparing the server for operation

Procedure

Install any options or cables previously removed to access the TPM connector.

Install the access panel.

Do one of the following:

Install the server in the rack, if necessary.

Install the server in the enclosure.

Power up the server.

Connect the power cords (rack and tower servers).

Press the Power On/Standby button.

Enabling the Trusted Platform Module

When enabling the Trusted Platform module, observe the following guidelines:

• By default, the Trusted Platform Module is enabled as TPM 2.0 when the server is powered on after

installing it.

• In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 or TPM 1.2.

• In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2 and

TPM 2.0, but only TPM 1.2 operation is supported.

Enabling the Trusted Platform Module as TPM 2.0

Enabling the Trusted Platform Module

115

Содержание ProLiant DL580 Gen10































































































































































Результаты поиска

Содержание ProLiant DL580 Gen10

Отзывы:

Похожие инструкции для ProLiant DL580 Gen10

Бренды по названию

Популярные бренды

HPE ProLiant DL580 Gen10, Руководство пользователя

Результаты поиска

Содержание ProLiant DL580 Gen10

Отзывы:

Похожие инструкции для ProLiant DL580 Gen10

Бренды по названию

Популярные бренды