HPE OfficeConnect 1920S 24G series Скачать руководство пользователя страница 57

Страница: 57 / 209

Spanning Tree

Click

Apply

to update the switch configuration. Your changes take effect immediately but are not

retained across a switch reset unless you click

Save Configuration

Designated Bridge

The bridge ID of the bridge with the designated port.

Designated Port

The port ID of the designated port.

Topology Change

Acknowledge

Indicates whether the next BPDU to be transmitted for this port will have the topology change

acknowledgment flag set.

Auto Edge

When enabled, Auto Edge allows the interface to become an edge port if it does not receive

any BPDUs within a given amount of time.

Edge Port

Indicates whether the interface is configured as an edge port (Enabled).

Point-to-point MAC

Indicates whether the link type for the interface is a point-to-point link.

Root Guard

When enabled, Root Guard allows the interface to discard any superior information it receives

to protect the root of the device from changing. The port gets put into discarding state and

does not forward any frames.

Loop Guard

When enabled, Loop Guard prevents an interface from erroneously transitioning from

blocking state to forwarding when the interface stops receiving BPDUs. The port is marked

as being in loop-inconsistent state. In this state, the interface does not forward frames.

TCN Guard

When enabled, TCN Guard restricts the interface from propagating any topology change

information received through that interface.

CST Regional Root

The bridge ID of the bridge that has been elected as the root bridge of the CST region.

CST Path Cost

The path cost from the interface to the CST regional root.

Loop Inconsistent State

Identifies whether the interface is currently in a loop inconsistent state. An interface

transitions to a loop inconsistent state if loop guard is enabled and the port stops receiving

BPDUs. In this state, the interface does not transmit frames.

Transitions Into Loop

Inconsistent State

The number of times this interface has transitioned into loop inconsistent state.

Transitions Out Of Loop

Inconsistent State

The number of times this interface has transitioned out of loop inconsistent state.

Field

Description

Содержание OfficeConnect 1920S 24G series


















































































































































































































Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды

HPE OfficeConnect 1920S 24G series, Руководство по управлению и настройке

Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды