HPE OfficeConnect 1920S 24G series Скачать руководство пользователя страница 170

Страница: 170 / 209

Page 170

Port Access Control

Authenticator Options

The fields in this section can be changed only when the selected port is configured as an authenticator port (that is, the PAE

Capabilities field is set to Authenticator.

Control Mode

The port-based access control mode on the port, which is one of the following:



Auto – The port is unauthorized until a successful authentication exchange has taken

place.



Force Unauthorized – The port ignores supplicant authentication attempts and does not

provide authentication services to the client.



Force Authorized – The port sends and receives normal traffic without client port-based

authentication.



MAC-Based – This mode allows multiple supplicants connected to the same port to each

authenticate individually. Each host connected to the port must authenticate separately

in order to gain access to the network. The hosts are distinguished by their MAC

addresses.

Quiet Period

The number of seconds that the port remains in the quiet state following a failed

authentication exchange.

Transmit Period

The value, in seconds, of the timer used by the authenticator state machine on the port to

determine when to send an EAPOL EAP Request/Identity frame to the supplicant.

Guest VLAN ID

The VLAN ID for the guest VLAN. The guest VLAN allows the port to provide a distinguished

service to unauthenticated users. This feature provides a mechanism to allow users access

to hosts on the guest VLAN. When this field is 0, the guest VLAN facility is disabled.

Guest VLAN Period

The value, in seconds, of the timer used for guest VLAN authentication.

Unauthenticated VLAN ID

The VLAN ID of the unauthenticated VLAN. Hosts that fail the authentication might be denied

access to the network or placed on a VLAN created for unauthenticated clients. This VLAN

might be configured with limited network access. To set the unauthenticated VLAN ID, click

the

Edit

icon associated with the field and specify the ID value in the available field. To reset

the unauthenticated VLAN ID to the default value, click the Reset icon associated with the

field and confirm the action.

Supplicant Timeout

The amount of time that the port waits for a response before retransmitting an EAP request

frame to the client.

Server Timeout

The amount of time the port waits for a response from the authentication server.

MAB Mode

The MAC-based Authentication Bypass (MAB) mode on the port, which can be enabled or

disabled.

Maximum Requests

The maximum number of times that the port sends an EAP request frame (assuming that no

response is received) to the client before restarting the authentication process.

Re-Authentication Period

The amount of time that clients can be connected to the port without being reauthenticated.

If this field is disabled, connected clients are not forced to reauthenticate periodically. To

change the value, click the

Edit

icon associated with the field and specify a value in the

available field. To reset the reauthentication period to the default value, click the Reset icon

associated with the field and confirm the action.

Field

Description

Содержание OfficeConnect 1920S 24G series


















































































































































































































Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды

HPE OfficeConnect 1920S 24G series, Руководство по управлению и настройке

Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды