HPE OfficeConnect 1920S 24G series Скачать руководство пользователя страница 97

Страница: 97 / 209

LLDP-MED Global Configuration

The following information displays for each port:

Table 48. LLDP Global Configuration—Port Fields

To enable or disable LLDP-MED on one or more interfaces, and to configure related features, select
the interfaces and click

Edit

Figure 67. Edit LLDP-MED Interface

To modify settings on all interfaces, click

Edit All

. The settings you configure are applied to all inter-

faces.

Field

Description

Interface

The ID of the physical and trunk interfaces.

Link Status

The link status of the interface, which is either Up or Down. An interface that is down does not

forward traffic.

MED Mode

The administrative status of LLDP-MED on the interface. When enabled, the LLDP-MED

transmit and receive functions are effectively enabled on the interface. This feature is enabled

by default.

Notification Status

Indicates whether LLDP-MED topology change notifications are enabled or disabled on the

interface. This feature is disabled by default.

Operational Status

Indicates whether the interface is configured to transmit TLVs. To transmit TLVs, the interface

must be enabled to receive and transmit LLDPDUs and must be connected to an LLDP-MED

device. The switch waits for the LLDP-MED device to advertise its information before the

switch transmits its own LLDP-MED TLVs, at which point the operational status becomes

enabled.

Transmitted TLVs

The LLDP-MED TLV(s) that the interface transmits. The HPE OfficeConnect 1920S switch,

can transmit TLVs of the following types:



Capabilities



Network Policy

Содержание OfficeConnect 1920S 24G series


















































































































































































































Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды

HPE OfficeConnect 1920S 24G series, Руководство по управлению и настройке

Результаты поиска

Содержание OfficeConnect 1920S 24G series

Отзывы:

Похожие инструкции для OfficeConnect 1920S 24G series

Бренды по названию

Популярные бренды