Configuring Access Control Lists
137
Adding a Rule to an Extended or Named IPv4 ACL
To add a rule to an Extended or Named IPv4 ACL:
1.
From the ACL identifier list, select the ID of the IPv4 extended or named ACL. For an extended
IPv4 ACL, the ID is a number from 100–199. For a named IPv4 ACL, the ID is up to 31 alphanu-
meric characters.
2.
Click
Add Rule
.
The Add IPv4 ACL Rule page appears.
Rule Attributes
Assign Queue
The number that identifies the hardware egress queue that will handle all packets matching
this rule.
Interface
The interface to use for the action:
Redirect – Allows traffic that matches a rule to be redirected to the selected interface
instead of being processed on the original port. The redirect function and mirror function
are mutually exclusive.
Mirror – Provides the ability to mirror traffic that matches a rule to the selected interface.
Mirroring is similar to the redirect function, except that in flow-based mirroring a copy of
the permitted traffic is delivered to the mirror interface while the packet itself is forwarded
normally through the device.
Committed Rate / Burst
Size
The allowed transmission rate for frames on the interface (Committed Rate), and the number
of bytes allowed in a temporary traffic burst (Burst Rate).
Field
Description
