66
reaction checked-element packet-loss
Use
reaction checked-element packet-loss
to configure a reaction entry for monitoring packet
loss in UDP jitter or voice operation.
Use
undo reaction
to delete the specified reaction entry.
Syntax
reaction
item-number
checked-element packet-loss threshold-type
accumulate
accumulate-occurrences
[
action-type
{
none
|
trap-only
} ]
undo reaction item-number
Default
No reaction entries for monitoring packet loss exist.
Views
ICMP jitter operation view
UDP jitter operation view
Voice operation view
Predefined user roles
network-admin
Parameters
item-number
: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-type
: Specifies a threshold type.
accumulate
accumulate-occurrences
: Specifies the total number of lost packets in the operation.
The value range is 1 to 15000 for the ICMP jitter and UDP jitter operations, and 1 to 60000 for the
voice operation.
action-type
: Specifies what action to be triggered. The default action is
none
.
none
: Specifies the action of displaying results on the terminal display.
trap-only
: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use
the
undo reaction
command to delete the entry, and then configure a new one.
Examples
# Create reaction entry 1 for monitoring packet loss in the UDP jitter operation. Before the NQA
operation starts, the initial state of the reaction entry is invalid. After the operation, the total number of
the lost packets is checked against the threshold. If the number reaches or exceeds 100, the state of
