HPE FlexNetwork MSR1002-4 Скачать руководство пользователя страница 43

Страница: 43 / 548

Table 9 Command output

Field Description

Data collecting in progress

The operation is in progress.

Send operation times

Number of operations.

Receive response times

Number of response packets received.

Min/Max/Average round trip time

Minimum/maximum/average round-trip time in milliseconds.

Square-Sum of round trip time

Square sum of round-trip time.

Last succeeded probe time

Time when the last successful probe was completed. If no probes
are successful in an operation, the field displays

This field is not available for UDP jitter, path jitter, and voice
operations.

Last packet received time

Time when the last response packet was received. If no response
packets in a probe were received, the field displays

This field is available only for UDP jitter and voice operations.

Packet loss ratio

Average packet loss ratio.

Failures due to timeout

Number of timeout occurrences in an operation.

Failures due to disconnect

Number of disconnections by the peer.

Failures due to no connection

Number of failures to connect with the peer.

Failures due to internal error

Number of failures due to internal errors.

Failures due to other errors

Failures due to other errors.

Packets out of sequence

Number of failures due to out-of-sequence packets.

Packets arrived late

Number of response packets received after a probe times out.

UDP-jitter results

UDP jitter operation results.

This field is available only for the UDP jitter operation.

ICMP-jitter results

ICMP jitter operation results.

This field is available only for the ICMP jitter operation.

Voice results

Voice operation results.

This field is available only for the voice operation.

RTT number

Number of response packets received.

Min positive SD

Minimum positive jitter from source to destination.

Min positive DS

Minimum positive jitter from destination to source.

Max positive SD

Maximum positive jitter from source to destination.

Max positive DS

Maximum positive jitter from destination to source.

Positive SD number

Number of positive jitters from source to destination.

Positive DS number

Number of positive jitters from destination to source.

Positive SD sum

Sum of positive jitters from source to destination.

Positive DS sum

Sum of positive jitters from destination to source.

Содержание FlexNetwork MSR1002-4





































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FlexNetwork MSR1002-4

Отзывы:

Похожие инструкции для FlexNetwork MSR1002-4

Бренды по названию

Популярные бренды

HPE FlexNetwork MSR1002-4, Справочник по командам

Результаты поиска

Содержание FlexNetwork MSR1002-4

Отзывы:

Похожие инструкции для FlexNetwork MSR1002-4

Бренды по названию

Популярные бренды