HPE FlexNetwork MSR1002-4, Справочник по командам

Страница: 109 / 548

95
Field Description
Clock status
Status of the clock source corresponding to this association:
•
configured —The association was created at the CLI.
•
dynamic —The association is established dynamically.
•
master —The clock source is the primary time server of the
current system.
•
selected —The clock source has survived the clock selection
algorithm.
•
candidate —The clock source is the candidate reference
source.
•
sane —The clock source has passed authentication and will
be used as the reference source.
•
insane —The clock source has not passed authentication, or
it has passed authentication but will not be used as the
reference source.
•
valid —The clock source is valid, which means the clock
source meets the following requirements:
{
It has been authenticated and synchronized.
{
Its stratum level is valid.
{
Its root delay and root dispersion values are within their
ranges.
•
invalid —The clock source is invalid.
•
unsynced —The clock source has not been synchronized or
the value of the stratum level is invalid.
Reference clock ID
•
If the reference clock is the local clock, the value of this field
is related to the value of the Clockstratumfield:
{
When the value of the Clockstratumfield is 0 or 1, this
field displays
LOCL .
{
When the Clockstratumfield has another value, this field
displaysthe MD5 digest value of the first 32 bits of the
IPv6 address. The MD5 digest value is in dotted decimal
format.
•
If the reference clock is the clock of another device on the
network, this field displaysthe MD5 digest value of the first 32
bits of the IPv6 address. The MD5 digest value is in dotted
decimal format. If this field displays
INIT , the local device has
not established a connection with the NTP server.
VPN instance
VPN instance of the NTP server. If the NTP server is in a public
network, this field displays
Not specified .
Local mode
Operation mode of the local device:
•
unspec —The mode is unspecified.
•
sym_active —Active mode.
•
sym_passive —Passive mode.
•
client —Client mode.
•
server —Server mode.
•
broadcast —Broadcast or multicast server mode.
•
bclient —Broadcast or multicast client mode.
local poll interval
Polling intervalfor the local device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the poll interval of the local device is 26, or 64 seconds.