61
Related commands
•
ptp
announce-interval
•
ptp
mode
•
ptp
profile
ptp asymmetry-correction
Use
ptp
asymmetry-correction
to configure asymmetric delay correction time.
Use
undo
ptp
asymmetry-correction
to restore the default.
Syntax
ptp
asymmetry-correction
{
minus
|
plus
}
value
undo
ptp
asymmetry-correction
Default
The asymmetric delay correction time is 0 nanoseconds, which means delay correction is not
performed.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
minus
: Subtracts the specified asymmetric delay correction value.
plus
: Adds the specified asymmetric delay correction value.
value
: Specifies the asymmetric delay correction value in the range of 0 to 2000000 nanoseconds.
Usage guidelines
This command is available only after you specify a PTP profile and a PTP mode.
Examples
# Configure the asymmetric delay correction time on FortyGigE 1/0/1 as 100 nanoseconds.
<Sysname> system-view
[Sysname] ptp profile 1588v2
[Sysname] ptp mode oc
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] ptp asymmetry-correction plus 100
Related commands
•
ptp
mode
•
ptp
profile
ptp clock-source
Use
ptp clock-source
to configure parameters of the Bits clock.
Use
undo ptp clock-source
to restore the default.
Syntax
ptp clock-source
{
bits1
|
bits2
} {
accuracy
acc-value
|
class
class-value
|
time-source
ts-value
}
