312
Table 75 Command output
Field Description
JID
Job ID. This field is available for the
display rtm policy active
command.
PolicyName Monitor
policy
name.
Type
Method for creating the policy:
•
TCL
—The policy is configured by using Tcl.
•
CLI
—The policy is configured from the CLI.
Event
Source of the event specified in the policy.
Options include
CLI
,
HOTPLUG
,
INTERFACE
,
PROCESS
,
SNMP
,
SNMP_NOTIF
,
and
SYSLOG
.
TimeRegistered
Time when the policy was created.
TimeActive
Time when the policy started to execute. This field is available only for the
display
rtm policy active
command.
event cli
Use
event cli
to configure a CLI event for a CLI-defined monitor policy.
Use
undo event
to delete the event in a CLI-defined monitor policy.
Syntax
event cli
{
async
[
skip
] |
sync
}
mode
{
execute
|
help
|
tab
}
pattern regular-exp
undo event
Default
No CLI events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
async
[
skip
]: Enables or disables the system to execute the command that triggers the policy. If
you specify the
skip
keyword, the system executes the actions in the policy without executing the
command that triggers the policy. If you do not specify the
skip
keyword, the system executes both
the actions in the policy and the command entered at the CLI.
sync
: Enables the system to execute the command that triggers the event only if the policy has been
executed successfully.
execute
: Triggers the policy when a matching command is entered.
help
: Triggers the policy when a question mark (?) is entered at a matching command line.
tab
: Triggers the policy when the
Tab
key is pressed to complete a parameter in a matching
command line.
pattern regular-exp
: Specifies a regular expression for matching commands that trigger the policy.
For more information about using regular expressions, see
Fundamentals Configuration Guide
.
Usage guidelines
Use CLI event monitor policies to monitor operations performed at the CLI.
