HPE AR64z, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 82

4. Remove the expansion cage .
5. Remove the OCP network adapter .
6. Remove the OCP air baffle.
To replace the component, reverse the removal procedure.
Removing and replacing the SFP+ riser
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. If installed, remove all transceivers connected to the SFP+ riser .
2. Power down the server on page 23.
3. Disconnect all peripheral cables from the server.
4. Remove the server on page 24.
5. Remove the expansion cage .
6. Remove the rear bracket.
Removal and replacement procedures 41