HPE AR64z, Руководство по техническому обслуживанию и ремонту

Страница: 36 / 82

Removing and replacing the front PCIe riser board
CAUTION: Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Power down the server on page 23.
2. Disconnect all peripheral cables from the server.
3. Remove the server on page 24.
4. Remove the expansion cage .
5. Remove the front expansion cage cover .
6. If installed, remove the expansion board .
7. Remove the front PCIe riser board:
a. Remove the screws securing the riser board to the expansion cage.
b. Remove the riser board from the expansion cage.
To replace the component, reverse the removal procedure.
Removing and replacing the rear PCIe riser board
CAUTION: Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
36 Removal and replacement procedures