9.
Install the terminal block connector in the power supply.
10. To prevent accidental power cord disconnection when sliding the server in and out of the chassis, secure the power
cord, wires, and/or cables in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable.
Never bend power cords and server cables tight enough to cause a crease in the sheathing.
b. Secure the wires and cables with the strain relief strap. Roll the extra length of the strap around the power
supply handle.
Hardware options installation
67
