background image

28  

Operator's manual 

HELPER ALLY 30

proper collection and treatment systems 
for these products.
At the end of life your product contact your 
distributor to have information on the col-
lection arrangements.

When buying this new product your distribu-
tor will also inform you of the possibility 
to return free of charge another end of life 
equipment as long as it is of equivalent 
type and has fulfilled the same functions 
as the supplied equipment.

Anyone disposing of the product otherwise 
than as described above will be liable to 
prosecution under the legislation of the 
country where the product is scrapped.

We also recommend you to adopt more 
measures for environment protection: recy-
cling of the internal and external packaging 
of the product and proper disposal of used 
batteries (only if contained in the product).

With your help it is possible to reduce the 
amount of natural resources used to pro-
duce electrical and electronic equipment, 
to minimise the use of landfills for the dis-
posal of the products and to improve the 
quality of life by preventing that potentially 
hazardous substances are released in the 
environment.

RECOMMENDED 

FIRE 

EXTINGUISHING 

EQUIPMENT

When choosing the most suitable fire extin-
guisher consult the following table:

Dry 

combus-

tibles

Inflam-

mable 

liquids

Electrical 

fires

Water

YES

NO

NO

Foam

YES

YES

NO

Dry 
chemical 

YES*

YES

YES

CO

2

YES*

YES

YES

YES*    Use only if more appropriate 
extinguishers are not on hand or when the 
fire is small.

 CAUTION

The indications given in this table are of 
a general nature and should be used as a 
general guide. All the applications of each 
type of extinguisher must be obtained from 
the relevant manufacturer.

COMPRESSED AIR 

SYSTEM DIAGRAM

1 Pressure regulator
2 Valve 5/3
3 Cylinder

Содержание HELPER ALLY 30















Отзывы: