HPA HELPER ALLY 30, Руководство оператора

Страница: 2 / 14

18 Operator's manual
HELPER ALLY 30
Note
Some of the illustrations in this manual have
been taken from photographs of prototypes;
standard production machines may vary in
some respects.
These instructions are for the attention of
personnel with basic mechanics skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how to
loosen or tighten the fixing devices. Do not
attempt to perform operations unless prop-
erly qualified or with suitable experience.
If necessary, please contact an authorised
Service Centre for assistance.
INTRODUCTION
The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance
of the HELPER.
If these instructions are followed carefully,
the machine will provide you with efficient
and long-lasting service, thus making your
work considerably easier.
The following paragraphs define the levels
of danger, associated with the warning cap-
tions found in this manual:
DANGER
Immediate danger, causing serious injury
or death.
WARNING
Danger or unsafe procedures that could
cause serious injury or death.
CAUTION
Danger or unsafe procedures that could
cause minor injury or material damage.
Read these instructions carefully before
powering up the equipment. Keep this
manual and all illustrative material sup-
plied with the machine in a folder near the
tyre changer, where it is readily accessible
for consultation by the machine operator.
The technical documentation supplied is
considered an integral part of the machine;
in the event of sale all relative documenta-
tion must remain with the equipment.
The manual is only to be considered valid for
the machine of the model and serial number
indicated on the nameplate applied to it.
WARNING
The instructions and information described
in this manual must always be complied
with: the manufacturer declines all liabil-
ity in the case of uses of the machine not
specifically described and authorised in
this manual.