HPA HELPER ALLY 30, Руководство оператора

Страница: 11 / 14

Operator's manual
HELPER ALLY 30
27
INFORMATION
ABOUT SCRAPPING
If the machine is to be scrapped, remove
all electrical, electronic, plastic and metal
parts.
Dispose of them separately, as provided
for by local regulations in force.
ENVIRONMENTAL
INFORMATION
The following disposal procedure must be
applied to the machines having the crossed-
out bin symbol on their data plate .
This product may contain substances that
can be hazardous to the environment and
to human health if it is not disposed of
properly.
We therefore provide you with the fol-
lowing information to prevent releases of
these substances and to improve the use
of natural resources.
Electrical and electronic equipment should
never be disposed of in the usual municipal
waste but must be separately collected for
their proper treatment.
The crossed-out bin symbol, placed on
the product and on this page, reminds the
user that the product must be disposed of
properly at the end of its life.
This prevents the inappropriate disposal of
the substances which this product contains,
or the improper use of some of them, from
having hazardous consequences for the
environment and human health. Further-
more, this helps to recover, recycle and
reuse many of the materials contained in
these products.
To this end, electrical and electronic
manufacturers and distributors have set up
in its rotation, keeping the bead inside the
drop centre. This guarantees that the tyre
is mounted correctly without the operator
having to use his hands.
- In case of special rims (Fig. 9A-9B) use
the spacer L.
Note: stop rotation when the block is next
to the mounting/demounting tool.
- Press the up lever and free the wheel from
the roller and presser pad.
MAINTENANCE
CAUTION
The manufacturer declines all responsi-
bility for claims resulting from the use of
non-original spares or accessories.
CAUTION
Before proceeding with any adjustment
or maintenance work, disconnect the ma-
chine from pneumatic and electric power
supply, and check that all the moving parts
are locked in place.
CAUTION
Do not remove or make changes to any
part of this machine (only the assistance
service may do this).
DANGER
Before carrying out any maintenance
operation or topping up with lubricant,
disconnect the machine from the com-
pressed air supply line.
WARNING
Keep the work area clean.
Do not clean the machine with compressed
air, jets of water or thinner.
During cleaning operations, try as far as
possible to prevent dust from forming
or rising.