manualshive.com logo in svg

HP Z1 G2, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Z1 G2 Скачать руководство пользователя страница 83

A

Linux technical notes

HP offers a variety of Linux solutions for HP workstation customers.

●

HP certifies and supports Red Hat

®

 Enterprise Linux (RHEL) on HP workstations.

●

HP certifies SUSE Linux Enterprise Desktop (SLED) on HP workstations.

●

HP offers a SLED 11 preload on some Z Series workstations.

For Linux setup and restore procedures, go to 

http://www.hp.com/support/workstation_manuals

 to find the 

user guide for your workstation.

Topics

System RAM on page 75

Audio on page 75

Network cards on page 76

Hyper-Threading Technology on page 76

NVIDIA Graphics Workstations on page 77

NOTE:

After you set up the operating system, verify that the latest BIOS, drivers, and software updates are 

installed. 

CAUTION:

Do not add optional hardware or third-party devices to the workstation until the operating 

system is successfully installed. Adding hardware might cause errors and prevent the operating system from 
installing correctly.

System RAM

HP supports different amounts of total RAM in various HP workstations, based on the number of hardware 
DIMM slots and the capabilities of the system. The total memory supported for each configuration is listed in 
the Hardware Support Matrix for HP Linux Workstations at 

http://www.hp.com/support/

linux_hardware_matrix

.

Audio

All HP workstations come with built-in audio hardware. The audio hardware is supported by the Advanced 
Linux Sound Architecture (ALSA) drivers included with all modern Linux distributions.

The audio hardware provides basic playback and recording features. The ability to simultaneously play audio 
from multiple sources, such as applications and CDs, is provided by software mixing functionality in the ALSA 
driver. The performance of software audio mixing and playback functionality is greatly improved in ALSA 
drivers version 1.0.13 and later.

After the NVIDIA proprietary driver is installed, the optional NVIDIA graphics devices supported in the HP Z1 
G2 Workstation also provide audio functionality over HDMI, which can be passed through the external 
DisplayPort connector to a monitor with audio capabilities. Such a configuration may present two audio 

System RAM

75

Содержание Z1 G2































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды