HP Xw6200 - Workstation - 2 GB RAM, Техническое справочное руководство

Страница: 34 / 209

34
SYSTEM MANAGEMENT
Computer Setup (F10)
The Computer Setup (F10) utilities enable you to:
„
Change factory default settings and set or change the system configuration, which might be
necessary when you add or remove hardware.
„
Determine if all of the devices installed on the workstation are recognized by the system and
functioning properly.
„
Determine information about the operating environment of the workstation.
„
Solve system configuration errors detected but not automatically fixed during the Power-On Self-Test
(POST).
„
Establish and manage passwords and other security features.
„
Establish and manage energy-saving timeouts (not supported for Linux platforms).
„
Modify or restore factory default settings.
„
Set the system date and time.
„
Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
„
Modify the boot order of bootable devices, such as hard drives, diskette drives, optical drives, or LS-
120 drives.
„
Configure the boot priority of SATA, IDE (ATA), and SCSI hard drive controllers.
„
Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run
during a Full Boot. You can set your system to:
„ always Quick Boot (default)
„ periodically Full Boot (from every 1 to 30 days)
„ always Full Boot
„
Enable or disable Network Server Mode, which enables the workstation to boot the operating system
when the power-on password is enabled with or without a keyboard or mouse attached. When
attached to the system, the keyboard and mouse remain locked until the power-on password is
entered.
„
Select POST Messages Enabled or Disabled to change the display status of POST messages. POST
Messages Disabled suppresses most POST messages, such as memory count, product name, and
other non-error text messages. If a POST error occurs, the error is displayed regardless of the mode
selected. To manually switch to POST Messages Enabled during POST, press any key (except
F1
through
F12
).
„
Establish an Ownership Tag, the text of which is displayed each time the system is turned on or
restarted.
„
Enter the Asset Tag or property identification number assigned by your company to this workstation.
„
Enable power-on password prompting during system restarts (warm boots) as well as during power-
on.
„
Secure the integrated I/O functionality, including the serial, USB, or parallel ports, audio, or
embedded NIC, so that the I/O functionality cannot be used until they are unsecured.
„
Enable or disable Master Boot Record (MBR) Security.