HP V1910, Руководство пользователя

Страница: 29 / 483

17
b.
Network diagram for configuration environment setup
CAUTION:
Verify the mark on the console port to ensure that you are connecting to the correct port.
NOTE:
The serial port on a PC does not support hot swapping. When you connect a PC to a powered-on
switch, connect the DB-9 connector of the console cable to the PC before connecting the RJ-45
connector to the switch.

When you disconnect a PC from a powered-on switch, disconnect the DB-9 connector of the console
cable from the PC after disconnecting the RJ-45 connector from the switch.
Setting terminal parameters
To configure and manage the switch, you must run a terminal emulator program on the console terminal, for
example, a PC. This section uses Windows XP HyperTerminal as an example.
The following are the required terminal settings:

Bits per second—38400

Data bits—8
 Parity—None

Stop bits—1

Flow control—None
 Emulation—VT100
Follow these steps to set terminal parameters, for example, on a Windows XP HyperTerminal:
Table 5 Select Start

All Programs

Accessories

Communications

HyperTerminal , and in the
Connection Description dialog box that appears, type the name of the new connection in the Name text
box and click OK .