HP V1910, Руководство пользователя

Страница: 137 / 483

125
Item Description
Group Name
Select an SNMP group to which the user belongs.

When the security level is NoAuth/NoPriv, you can select an
SNMP group with no authentication no privacy.

When the security level is Auth/NoPriv, you can select an
SNMP group with no authentication no privacy or
authentication without privacy.

When the security level is Auth/Priv, you can select an SNMP
group of any security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.
Authentication Password Set the authentication password when the security level is
Auth/NoPriv or Auth/Priv.
The confirm authentication password must be the same with the
authentication password.
Confirm Authentication Password
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES)
when the security level is Auth/Priv.
Privacy Password Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy
password.
Confirm Privacy Password
ACL
Associate a basic ACL with the user to restrict the source IP address
of SNMP packets, that is, you can configure to allow or prohibit
SNMP packets with a specific source IP address, so as to allow or
prohibit the specified NMS to access the agent by using this user
name.
Return to SNMPv3 configuration task list .
Configuring SNMP trap function
Table 38 Select Device

SNMP from the navigation tree.
Table 39 Click the Trap tab to enter the page as shown in b .
Table 40 On the upper part of the page, you can select to enable the SNMP trap function; on the lower part
of the page, you can configure target hosts of the SNMP traps.
Table 41 Click Add to enter the Add Trap Target Host page, as shown in c .