HP V1910, Руководство пользователя

Страница: 281 / 483

269
Item Description
Interface
Select the output interface.
You can select any available interface, for example, a virtual interface, of the
device. If you select NULL 0 , the destination IP address is unreachable.
Static route configuration example
Network requirements
The IP addresses of devices are shown in a . Configure IPv4 static routes on Switch A, Switch B, and Switch
C so that any two hosts can communicate with each other.
a.
Network diagram for IPv4 static route configuration
Configuration outlines
Table 68 On Switch A, configure a default route with Switch B as the next hop.
Table 69 On Switch B, configure one static route with Switch A as the next hop and the other with Switch
C as the next hop.
Table 70 On Switch C, configure a default route with Switch B as the next hop.
Configuration procedure
Table 71 Configure the IP addresses of the interfaces (omitted)
Table 72 Configure IPv4 static routes
# Configure a default route to Switch B on Switch A.
 Select Network

IPv4 Routing from the navigation tree of Switch A, and then click the Create tab to
enter the page shown in b .

Type 0.0.0.0 for Destination IP Address .

Select 0 (0.0.0.0) from the Mask drop-down list.
 Type 1.1.4.2 for Next Hop .

Click Apply .