HP V1910, Руководство пользователя

Страница: 255 / 483

243
f.
The page for configuring LLDP on the selected port

Select Tx from the LLDP Operating Mode drop-down list.

Click Apply .
# Enable global LLDP and configure the global LLDP setup as needed (see d ).

Click the Global Setup tab.

Select Enable from the LLDP Enable drop-down list.
 Click Apply .
Configuration verification
# Display the status information of port GigabitEthernet 1/0/2 on Switch A.

Select Network

LLDP from the navigation tree to enter the Port Setup tab.
 Click GigabitEthernet1/0/2 in the port list.

Click the Status Information tab at the lower half of the page. The output shows that port
GigabitEthernet 1/0/2 is connected to a non-MED neighbor device (Switch B), as shown in a .