HP T9576G06, Руководство по управлению

Страница: 683 / 778

Ethernet Subagent
SNMP Configuration and Management Manual — 424777-006
14 -47
3006: ZESA-EVT-BACKUP-OBJ-UNAVAIL
ZEMS-VAL-reason
indicates the reason the backup Ethernet Subagent process has become
unavailable. The DDL AS clause associated with this value is inserted in the
message text following “cause.”
ZESA-VAL-STATE-state
indicates the previous and current states of the backup Ethernet Subagent
process. The DDL AS clauses associated with this value are inserted in the
message text following “previous state” and “current state.”
zesaProcessName
is the name of the underlying process whose failure caused the backup Ethernet
Subagent process to go out of service. The name of the Ethernet Subagent
process specified for the subagent’s private zesaProcessName MIB object is
inserted in the message text following “underlying object.”
This information is displayed only if the value of the ZEMS-TKN-CHANGE-
REASON is ZEMS-VAL-UNDERLYING-FAILED.
code-location/internal-context-text
indicates where in the subsystem or application code the fault occurred.
Value of
ZEMS-TKN-CHANGE-REASON Associated Text (DDL AS Clause) and
Meaning
ZEMS-VAL-UNDERLYING-FAILED “underlying-serv-failed” indicates that an
underlying service on which the backup
Ethernet Subagent process depends has
failed.
ZEMS-VAL-OPERATOR-INITIATED “operator-initiated” indicates that an operator
has taken the backup Ethernet Subagent
process out of service.
Value of
ZEMS-TKN-STATE-PREVIOUS
Associated Text (DDL AS Clause)
ZESA-VAL-STATE-CONNECTED “connected” indicates a normal operational
state.
Value of
ZEMS-TKN-STATE-CURRENT
Associated Text (DDL AS Clause)
ZESA-VAL-STATE-DISCONNECTED “disconnected” indicates a nonoperational
state where subagent function is not
available.
ZESA-VAL-STATE-DISABLED “disabled” indicates that the process has
been taken out of service explicitly by an
operator setting the zesaBackupState MIB
object to “disabled.”