HP T9576G06, Руководство по управлению

Страница: 310 / 778

TCP/IP Subagent
SNMP Configuration and Management Manual — 424777-006
8- 80
1005: ZTSA-EVT-BACKUP-OBJ-AVAIL
ZEMS-VAL-reason
indicates the reason the backup TCP/IP Subagent process has become available.
The DDL AS clause associated with this value is inserted in the message text
following “reason.”
ZTSA-VAL-STATE-state
indicates the previous state of the backup TCP/IP Subagent process. The DDL AS
clause associated with this value is inserted in the message text following
“previous state.”
ZTSA-VAL-STATE-CONNECTED
indicates the current state of the backup TCP/IP Subagent process. The DDL AS
clause of this value (“connected,” defined in the preceding table) appears in the
message text following “current state.”
Value of
ZEMS-TKN-CHANGE-REASON Associated Text (DDL AS Clause) and
Meaning
ZEMS-VAL-UNDERLYING-UP “underlying-serv-up” indicates that the backup
TCP/IP Subagent process is available
because an underlying resource on which it
depends has become available.
ZEMS-VAL-OPERATOR-INITIATED “operator-initiated” indicates that an operator
has brought the backup TCP/IP Subagent
process up by setting the ztsaBackupState
MIB object to “enabled.”
Value of
ZEMS-TKN-STATE-PREVIOUS
Associated Text (DDL AS Clause)
ZTSA-VAL-STATE-CONNECTED “connected” indicates a normal operational
state.
ZTSA-VAL-STATE-DISCONNECTED “disconnected” indicates a nonoperational
state where subagent function dependent on
the interface was not available.
ZTSA-VAL-STATE-ENABLED “enabled” indicates that the process was set
by an operator such that the subagent would
immediately attempt to restore it to a
connected state.
ZTSA-VAL-STATE-DISABLED “disabled” indicates that the process had
been taken out of service explicitly by an
operator setting the ztsaBackupState MIB
object to “disabled.”