HP T9576G06, Руководство по управлению

Страница: 177 / 778

SCF Commands for the SNMP Agent
SNMP Configuration and Management Manual — 424777-006
5 -9
ADD PROFILE Command
ACCESS { READONLY | READWRITE }
specifies the level of authority of an associated community to retrieve and alter
network management information:
The default is READONLY.
Considerations: ADD PROFILE
•
The value 0 is recognized as a wildcard in the host addressing scheme for the
HOSTADDR attribute. The PROFILE object only accepts a full wildcard
specification (“0.0.0.0”) or a distinct Internet address (for example,
“130.50.85.100”).
•
Each request that a NonStop agent receives from an SNMP manager includes a
community string composed of one or two discrete sections delimited by two
colons (
::
) as follows:
community-name[::subagent-password]
The community string included in incoming requests is part of the SNMP
manager’s configuration. The NonStop agent only compares the
community-
name
portion of the incoming request’s community string with the COMMUNITY
attribute values in its authentication table. Once an authenticated request has been
forwarded to a subagent, the subagent might employ additional security based on
the
subagent-password
portion of the community string.
•
If you start a NonStop agent process with its default WARM startup parameter (and
name the process $ZSNMP), a PROFILE object called $ZSNMP.#DEFAULT with
the following attribute values is automatically added and started:
PROFILE $ZSNMP.#DEFAULT, COMMUNITY "public",
HOSTADDR "0.0.0.0", ACCESS READONLY
Unless you explicitly stop this PROFILE object, the NonStop agent continues to
accept any incoming request originating from any manager belonging to the
“public” community, regardless of any other table entries you define to tighten
security.
•
You must configure an authentication table entry for each community other than
“public” from which the NonStop agent is to receive SNMP requests.
•
Two PROFILE objects cannot be defined with the same community (same
COMMUNITY attribute value).
READONLY The NonStop agent accepts Get and GetNext requests from
the associated community. Members of the community can
only retrieve information.
READWRITE The NonStop agent accepts Set, Get, and GetNext requests
from the associated community. Members of the community
can alter as well as retrieve information.