HP T9576G06, Руководство по управлению

Страница: 316 / 778

TCP/IP Subagent
SNMP Configuration and Management Manual — 424777-006
8- 86
1007: ZTSA-EVT-EMSCOLL-OBJ-AVAIL
ZTSA-VAL-STATE-state
indicates the previous state of the interface to the EMS collector process. The DDL
AS clause associated with this value is inserted in the message text following
“previous state.”
ZTSA-VAL-STATE-CONNECTED
Indicates the current state of the interface between the EMS collector process and
the TCP/IP Subagent. The DDL AS clause of this value (“connected,” defined in
the preceding table) appears in the message text following “current state.”
ZEMS-VAL-NULL
Indicates the type of subsystem-defined event. Because the TCP/IP Subagent
process has not defined this as a private event, the DDL AS clause “undefined”
always appears in the message text following “user content.”
Cause. The subagent acquired or reacquired its connection to the
configured EMS collector process (ztsaEmsCollectorName).
Effect. Subsequent EMS events generated by the subagent are sent to
ztsaEmsCollectorName.
Recovery. Informational message only; no corrective action is needed.
Value of
ZEMS-TKN-STATE-PREVIOUS
Associated Text (DDL AS Clause)
ZTSA-VAL-STATE-CONNECTED “connected” indicates a normal operational
interface between the EMS collector and the
subagent.
ZTSA-VAL-STATE-DISCONNECTED “disconnected” indicates a nonoperational
state such that subagent function dependent
on the interface is not available.
ZTSA-VAL-STATE-ENABLED “enabled” indicates that the interface had
been set by an operator such that the
subagent immediately attempts to restore it to
a connected state.
ZTSA-VAL-STATE-DISABLED “disabled” indicates that the interface had
been taken out of service explicitly by an
operator setting the ztsaEmsCollectorState
MIB object to “disabled.”