HP T9576G06, Руководство по управлению

Страница: 502 / 778

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual — 424777-006
12 -10
Using the -t and PARAM Startup Parameters
Using the -t and PARAM Startup Parameters
For Parallel Library TCP/IP compatibility, you can specify IP addresses along with the
TCP/IP process names. The format is:
-t ([tcpip-proc-name ] [,tcpip-proc-name ] ... )
where
tcpip-proc-name
is:
$tcpip-process-name
($tcpip-process-name:ip-address1 [, ip-address2 ] )
ip-address
If the -t parameter specifies:
•
A TCP/IP process and one or more IP addresses, the IP addresses are associated
with the specified TCP/IP process.
•
Only a TCP/IP process name, the TCP/IP process name is associated with all
subnets for the TCP/IP subsystem.
•
Only an IP address, the IP address is associated with the default TCP/IP process,
$ZTC0.
You can also use PARAMs with the -t parameter to specify additional TCP/IP
processes. You must specify both PARAMs. Otherwise, the PARAMs are ignored.
Syntax of the startup PARAMs is:
tcpip-proc-name
specifies a TCP/IP process from which you want the Trap Multiplexer to receive
traps.
ip-address
specifies the IP address of the TCP/IP process from which you want the Trap
Multiplexer to receive traps.
PARAM ZSMP^TCPIP^NAME tcpip-proc-name
PARAM ZSMP^TCPIP^ADDR ip-address