HP T9576G06, Руководство по управлению

Страница: 458 / 778

Host Resources Subagent
SNMP Configuration and Management Manual — 424777-006
11 -82
MIB Objects
zhrmThrDiskTrapEnable
1.3.6.1.4.1.169.3.180.2.2.4
read-write
INTEGER {
diskTrapsDisabled(0),
diskTrapsEnabled(1) } When set to 1
(diskTrapsEnabled)
a trap
(zhrmDiskThreshold)
is sent whenever
utilization of a
writable disk reaches
or exceeds
zhrmThrDiskHigh
Value or reaches or
falls below
zhrmThrDiskLow
Value. One of these
values is
displayed:
diskTraps-
Disabled
diskTrapsEnabled
When setting
these values, use
0 or 1.
Refer to “Traps”
later in this
section for a
description of the
trap and its
generation
algorithm.
Initialized to 1
(diskTrapsEnabled)
at startup, but can be
changed from an
SNMP manager.
zhrmThrDiskHighValue
1.3.6.1.4.1.169.3.180.2.2.5
read-write
INTEGER (1..100) The percent
utilization of a
writable disk at or
above which
zhrmThrDiskTable
entries are created
and a trap generated
if zhrmThrDiskTrap
Enable is set to 1. A value of 1
through 100, 90
by default. A
value of 100
suppresses trap
generation
(regardless of the
value of
zhrmThrDiskTrap
Enable) and
zhrmThrDiskTable
entry creation. Set at startup by
using the -h startup
parameter. Can be
changed by setting
the value of this MIB
object.
zhrmThrDiskLowValue
1.3.6.1.4.1.169.3.180.2.2.6
read-write
INTEGER (1..100) The percent
utilization of a
writable disk at or
below which a trap is
generated if
zhrmThrDiskTrap
Enable is set to 1. A value of 1
through 100, 45
by default. A
value of 0
suppresses trap
generation,
regardless of the
value of
zhrmThrDiskTrap
Enable. Set at startup by
using the -i startup
parameter. Can be
changed by setting
the value of this MIB
object.
Table 11-13. zhrmThreshold Group Objects Supported by Host Resources
Subagent's MIB
(page 5 of 6)
Object and Attributes Definition Format of Value Derivation of Value