HP StorageWorks X9320 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 152

HP StorageWorks X9320 Скачать руководство пользователя страница 86

16 Recovering a file serving node

Use the following procedure to recover a failed file serving node. You will need to create a
QuickRestore DVD, as described later, and then install it on the affected node. This step installs
the operating system and X9000 Software on the node and launches a configuration wizard. Note
the following:

•

If you are restoring a file serving node that was previously a host for the agile management
console, you can configure the node as a passive agile management console during the
recovery.

•

If you are restoring a Management Server that was migrated to be a host for the agile
management console, start the recovery, as described in the following section, and then use
the manual procedure for configuring a file serving node. Configure the Management Server
as a passive agile management console.

CAUTION:

The Quick Restore DVD restores the file serving node to its original factory state. This

is a destructive process that completely erases all of the data on local hard drives.

Starting the recovery

To recover a failed file serving node, follow these steps:

1.

If a NIC monitor is configured on the user network, remove the monitor. To determine if NIC
monitoring is configured, run the following command on the Management Server:

ibrix_nic -i -h <hostname>

Check the output for a line such as the following:

Monitored By : titan16

To remove the monitor, use the following command:

ibrix_nic -m -h MONITORHOST -D DESTHOST/IFNAME

For example:

ibrix_nic -m -h titan16 -D titan15/eth2

2.

Obtain the latest Quick Restore image from the HP kiosk

http://www.software.hp.com/kiosk

(you will need your HP-provided login credentials).

3.

Burn the ISO image to a DVD.

4.

Insert the Quick Restore DVD into the server's DVD-ROM drive.

5.

Restart the server to boot from the DVD-ROM.

6.

When the following screen appears, enter

qr

to recover the file serving node.

86

Recovering a file serving node

«
...
84
85
86
87
88
...
»

Содержание StorageWorks X9320

























































































































































Отзывы:

Нет отзывов