HP StorageWorks X9320, Руководство администратора

Страница: 135 / 152

C Warnings and precautions
Electrostatic discharge information
See Electrostatic discharge .
Grounding methods
There are several methods for grounding. Use one or more of the following methods when handling
or installing electrostatic sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis.
Wrist straps are flexible straps with a minimum of 1 megohm 10 percent resistance in the
ground cords. To provide proper ground, wear the strap snug against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both
feet when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an HP-authorized
reseller install the part.
NOTE: For more information on static electricity or assistance with product installation, contact
your HP-authorized reseller.
Equipment symbols
If the following symbols are located on equipment, hazardous conditions could exist.
WARNING!
Any enclosed surface or area of the equipment marked with these symbols indicates the presence
of electrical shock hazards. Enclosed area contains no operator serviceable parts. To reduce the
risk of injury from electrical shock hazards, do not open this enclosure.
WARNING!
Any RJ-45 receptacle marked with these symbols indicates a network interface connection. To
reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
WARNING!
Any surface or area of the equipment marked with these symbols indicates the presence of a hot
surface or hot component. Contact with this surface could result in injury.
Electrostatic discharge information 135